Details
Features:
1.Brand New High Quality Curing Light.
2.Composes of high power LED, qualified fiber rod.
3. Noiseless; No libration; Generate little heat when working.
4.Low consumption of standby power with thirty days' standby time
5.Large capacity Li-battery can be used for a long one with full charging.
6.Plenty of fiber rods with very reasonable price on sale for your replacement.
7.Wireless/Cordless design without no cable connect to the unit which could be used very conveniently
8.It adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time.
9.Many brands' resin materials can be cured by this curing-light with optional working modes and lighting times.
Technical:
1.Light source: blue light
2.Wave length: 430nm-485nm
3.Output intensity:900mw／cm2
4.Power supply: rechargeable Lithium battery 3.7V/2200mAh
5.Input adapter: 100V to 240V~50Hz/60Hz (Available for global users.)
6. Safety kind: Ordinary type B．non—continuous service Ip40．Class 2
7.Working condition: environment temperature: 5℃-40℃; relative humidity:≤80%
8.The fiber rod can be autoclaved up to the tempreture134 °C / 273 °F & pressure 0.2Mpa.
9.Digital LED screen display, clear operation.
10.Four sets of working time: 5s, 10s, 15s, 20s.Three working modes: All light; Gradually; Flashing.
Packing List:
Main Unit
Light Guide
Light Board
Charging base
100v-240v AC Adapter
English Operation Manual
1.Brand New High Quality Curing Light.
2.Composes of high power LED, qualified fiber rod.
3. Noiseless; No libration; Generate little heat when working.
4.Low consumption of standby power with thirty days' standby time
5.Large capacity Li-battery can be used for a long one with full charging.
6.Plenty of fiber rods with very reasonable price on sale for your replacement.
7.Wireless/Cordless design without no cable connect to the unit which could be used very conveniently
8.It adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time.
9.Many brands' resin materials can be cured by this curing-light with optional working modes and lighting times.
Technical:
1.Light source: blue light
2.Wave length: 430nm-485nm
3.Output intensity:900mw／cm2
4.Power supply: rechargeable Lithium battery 3.7V/2200mAh
5.Input adapter: 100V to 240V~50Hz/60Hz (Available for global users.)
6. Safety kind: Ordinary type B．non—continuous service Ip40．Class 2
7.Working condition: environment temperature: 5℃-40℃; relative humidity:≤80%
8.The fiber rod can be autoclaved up to the tempreture134 °C / 273 °F & pressure 0.2Mpa.
9.Digital LED screen display, clear operation.
10.Four sets of working time: 5s, 10s, 15s, 20s.Three working modes: All light; Gradually; Flashing.
Packing List:
Main Unit
Light Guide
Light Board
Charging base
100v-240v AC Adapter
English Operation Manual
